WaynePumps

The Wayne CDU800 is a powerful 1/2 HP submersible sump pump designed for homeowners tackling basement flooding from heavy rains, snowmelt, or groundwater. It excels in sump pits 11 inches or larger, pumping up to 5100 gallons per hour at 0 feet lift and handling up to 20 feet vertically. Ideal for those seeking reliable, automatic water removal without constant monitoring.

Standout features include a top suction design that minimizes clogs by pulling water from the pit's surface, and a vertical float switch rigorously tested to 1 million cycles for flawless automatic activation. The ceramic mechanical seal and permanently lubricated bearings ensure cool, quiet operation even in demanding conditions, while the two-pole switch adds safety against single-point failures.

Build quality shines with durable cast iron housing and corrosion-resistant steel components, assembled in the USA for longevity. The 1-1/2 inch discharge simplifies plumbing connections, and protective features like lightning-resistant conductors and overload protection safeguard the motor. At 9x9x12 inches and 12 pounds, it fits compactly yet feels substantial.

Potential drawbacks include its restriction to indoor use and the need for a minimum pit size, which may not suit all setups. It also relies on corded electric power without built-in backup.

Overall, the Wayne CDU800 delivers top-tier performance for flood-prone basements, earning its spot as a bestseller with proven reliability and a 3-year warranty. Highly recommended for robust water management.

Power: 1/2 HP, Corded Electric, 115V

Flow Rate: 5100 GPH (85 GPM) at 0 ft, Max Lift 20 ft

Dimensions: 9"L x 9"W x 12"H, Weight 12 lbs

Discharge: 1-1/2" NPT

Material: Cast Iron & Steel, Sump Pit Min: 11" diameter

Warranty: 3 Years

The Wayne CDU790 is a robust 1/3 HP submersible sump pump tailored for homeowners dealing with basement water issues from rain, snowmelt, or groundwater. Designed for 11-inch or larger sump basins, it excels in keeping spaces dry with its high-capacity 4600 GPH flow rate at 0 feet lift, making it ideal for moderate to heavy water inflow without overwhelming your setup.

Standout features include the integrated vertical float switch, which activates reliably without getting stuck, and a top suction strainer that minimizes clogs from debris while preventing air locks. Users rave about its speed, often emptying pits in seconds, and its whisper-quiet operation that won't disturb the household. Real-world performance shines in tight spaces where other pumps fail, with many reporting years of trouble-free service far beyond expectations.

Build quality stands out with a corrosion-resistant epoxy-coated steel motor housing, cast iron volute, and stainless steel components, ensuring longevity in harsh, wet environments. The easy-carry handle simplifies installation and maintenance, often completed in under 30 minutes without special tools or plumbing changes.

Potential drawbacks include its limitation to indoor use, as the fine intake can clog with larger solids if misused outdoors, and its 16.4-pound weight demands some strength for handling. Regular checks help maintain optimal performance.

Overall, the Wayne CDU790 earns top marks for reliability, power, and value, making it a smart choice for anyone prioritizing a dependable basement safeguard. Its proven track record in customer experiences solidifies it as a superior replacement pump.

Power: 1/3 HP, 120V Corded Electric

Flow Rate: 4600 GPH at 0' (63 GPM max)

Dimensions: 10.5"L x 9"W x 11"H

Weight: 16.4 lbs

Material: Cast Iron with Epoxy-Coated Steel

Discharge: 1-1/2" NPT

Basin Size: 11" diameter or larger

Warranty: 3 Years Limited

The Wayne CDU980E is a high-performance 3/4 HP submersible sump pump designed for homeowners battling basement flooding from heavy rains or high groundwater. With its ability to move up to 5,490 gallons per hour, it excels in demanding conditions where lesser pumps fail, making it ideal for larger homes or areas prone to intense storms.

Standout features include the integrated vertical float switch for dependable automatic cycling in narrow 11-inch pits, and a top suction design that filters debris to minimize clogs and eliminate air lock issues. Real-world users praise its power during flash floods, noting it handles water inflow effortlessly while running quieter than competitors, often barely audible even during frequent cycles.

Build quality shines with heavy-duty cast iron and stainless steel components for corrosion resistance and longevity, assembled in the USA. Installation is straightforward, typically taking 15-30 minutes with no special tools or weep hole required, and it fits standard setups seamlessly.

Few drawbacks exist, though it demands a minimum 11-inch sump basin and weighs 11 pounds, so lifting assistance may help. No built-in backup power means pairing with a separate system for outages.

Overall, the CDU980E delivers exceptional reliability and performance, backed by a 5-year warranty. It earns top marks for anyone serious about flood protection.

Power: 3/4 HP, 120V Corded Electric

Flow Rate: 5,490 GPH at 0 ft (92 GPM max)

Dimensions: 10.5 x 9 x 11 inches

Weight: 11 pounds

Material: Cast Iron & Stainless Steel

Sump Pit Requirement: 11-inch diameter minimum

Warranty: 5 Years

The Wayne WaterBUG is a compact 1/6 HP submersible pump designed for water removal and transfer in homes, perfect for homeowners facing basement floods, window wells, flat roofs, or standing water in yards and pools. Its Multi-Flo technology allows switching between top discharge for confined areas and side discharge for larger surfaces, making it highly versatile without needing multiple tools.

Users rave about its real-world performance, pumping up to 1350 GPH and sucking water down to just 1/16 inch, which transformed tedious tasks like draining above-ground pools or flooded rooms into quick jobs. Reviews highlight its quiet motor, easy hose connections, and ability to handle uphill pumping, saving hours of manual labor with wet vacs or buckets.

Build quality stands out with reinforced thermoplastic housing, corrosion-resistant brass outlets, and a multi-ring suction strainer that keeps debris out. At 6 pounds and 11x11x10 inches, its lightweight design includes a cord wrap and hang tab for effortless storage, all proudly assembled in the USA.

Potential drawbacks include no auto shut-off, so vigilance is needed to unplug it once water is gone, and occasional clogs from larger debris like leaves, though the cleanout is straightforward. It shines with cleaner water but may need pre-filtering for muckier jobs.

Overall, the WaterBUG delivers exceptional value for emergency water removal, earning high marks for speed, ease, and reliability. If you deal with occasional floods or transfers, this pump is a must-have toolbox essential.

Power: 1/6 HP, Corded Electric, 120 Volts

Performance: 1350 GPH at 0 ft, 23 GPM Max Flow, 30 ft Max Lift

Dimensions: 11"L x 11"W x 10"H, 6 lbs

Material: Thermoplastic, Yellow Color

Features: Multi-Flo Technology, Garden Hose Compatible, Submersible

"Easiest pool cleanup ever... dropped it in at 5:30, most water gone by 8:30!" - Saved backs post-surgery.

"Made short work of my flooded downstairs room... saved so much labor." - Quiet and fast.

"Sucks up a quarter inch or more... great for low water issues." - Effective shallow suction.

"Strong little pump for draining ponds... two hose attachments are super convenient." - Versatile and light.

The Wayne CDU1000ET is a heavy-duty 1 HP submersible sump pump designed for homeowners battling basement flooding from heavy rains, snowmelt, or high water tables. It excels in 11-inch or larger sump basins, activating at a 9-inch water level and shutting off at 4 inches, making it ideal for keeping living spaces dry and protected.

Standout features include a top suction design that eliminates air locks and reduces clogging, pumping up to 6100 gallons per hour at 25-foot lift height. Users rave about its power, with one emptying a 230-gallon hot tub in under 5 minutes, and its ultra-quiet operation that lives up to the 'Hardest Working Pump You'll Never Hear' promise. The new switch has been rigorously tested over 1 million cycles for dependable activation every time.

Build quality shines with a corrosion-resistant stainless steel motor housing, cast iron volute, and fasteners, all assembled in the USA. At 10.5 x 9 x 11 inches and about 21 pounds, it installs in roughly 15 minutes without modifications. A 5-year warranty backs its energy-efficient, corded electric performance on standard 120V outlets.

Drawbacks include indoor-only use and the need for a compatible 1-1/2 inch NPT discharge hose. While most reviews highlight reliability, one user felt the quality seemed subpar compared to local store pumps.

Verdict: This pump delivers superior water removal and longevity for serious flood protection. If you face frequent water issues, its power and quiet reliability make it a top choice worth the investment.

Power: 1 HP, Corded Electric, 120 Volts

Performance: 6100 GPH (101.67 GPM), Max Lift 25 Feet

Build: Stainless Steel & Cast Iron, 10.5"L x 9"W x 11"H, 9.48 kg

Discharge: 1-1/2” NPT, For 11+ inch basins

Includes: Sump Pump, Manual